Auto Holy Grail not working with external intervalometer - Printable Version +- LRTimelapse Forum (https://forum.lrtimelapse.com) +-- Forum: Time Lapse Shooting (https://forum.lrtimelapse.com/Forum-time-lapse-shooting) +--- Forum: LRTimelapse and qDslrDashboard Auto-Holy-Grail Ramping (https://forum.lrtimelapse.com/Forum-lrtimelapse-and-qdslrdashboard-auto-holy-grail-ramping) +--- Thread: Auto Holy Grail not working with external intervalometer (/Thread-auto-holy-grail-not-working-with-external-intervalometer) |
Auto Holy Grail not working with external intervalometer - yelmarb - 2018-04-30 I've been testing Auto Holy Grail with qDslr's intervalometer and it ramps just fine. However, when I use an external intervalometer, plugged into the camera, Auto Holy Grail no longer ramps the exposure. Exposure was 1s, interval times were 8s. I'm using a Macbook Pro, USB tethered to a Canon 5Dsr, everything set to manual, drive mode is on single and manual focus. Has anyone had this issue? RE: Auto Holy Grail not working with external intervalometer - Gunther - 2018-04-30 Most likely your intervalometer blocks the camera. You can avoid this with the focus-hack, see: https://lrtimelapse.com/news/intervalometer-hack/ RE: Auto Holy Grail not working with external intervalometer - yelmarb - 2018-05-01 Thanks Gunther, unfortunately cutting the focus / green wire on a Canon TC80n3 stops the intervalometer from working. In lieu of a soldering iron, I'm going to stay with qDslr's intervalometer. Thanks again for your help. |