How to well understand " Transfer every" and " average pool size " ? - Printable Version +- LRTimelapse Forum (https://forum.lrtimelapse.com) +-- Forum: Time Lapse Shooting (https://forum.lrtimelapse.com/Forum-time-lapse-shooting) +--- Forum: LRTimelapse and qDslrDashboard Auto-Holy-Grail Ramping (https://forum.lrtimelapse.com/Forum-lrtimelapse-and-qdslrdashboard-auto-holy-grail-ramping) +--- Thread: How to well understand " Transfer every" and " average pool size " ? (/Thread-how-to-well-understand-transfer-every-and-average-pool-size) |
How to well understand " Transfer every" and " average pool size " ? - djoubert - 2020-12-17 About these 2 parameters to set in the lrtimelapse feature of Dslrdashboard app, I need to be sure to well understand, to be sure also that no other parameter interferes..., My understanding for these parameters : "transfer every" means that for instance set to 6 frames, only 1 out of 6 jpeg is downloaded to the tablet. "average pool size" means that for instance set to 3, the average is done with the last 3 jpeg downloaded. with these 2 parameters set as above, a new average is done every 6 frame, with 3 last frames downloaded ( meaning the last one, "-6" and "-12" one ) If it's the right understanding, is it still right with the general parameter "display next jpg" set.? Thank you for any help, this will help me to optimize my intervales... RE: How to well understand " Transfer every" and " average pool size " ? - Gunther - 2020-12-17 Yes, that's correct. However, I'd recommend to leave those values at their defaults, they are best suited for most cases. RE: How to well understand " Transfer every" and " average pool size " ? - djoubert - 2020-12-17 Thank you Gunther, usually I keep the default parameters. Wwith my new canon R6, i have difficulties to reach the smallest interval I have with may Canon 6D. Shooting a lot of Moon timelapse with long focal lengh, I play with the limits... Merci / Dominique |