Posts: 2
Threads: 1
Joined: Sep 2020
War sehr froh, den ProTimer 3.0 über Blackforest schnell zu erhalten... die EOS RP und 80D lösen aber nicht aus!
M, AF off, long time noise reduction off, Firmware 23, release time 300 ms, Autofocus Time 200 ms, DSLM Standy 5 sec (eco mode off), Decoupling time 2 sec
Neues C-6 Kabel gekauft, https://www.amazon.de/gp/product/B01N0Z5...UTF8&psc=1 - gleiches Problem...
Was könnte ich noch ausprobieren?
M, AF off, long time noise reduction off, Firmware 23, release time 300 ms, Autofocus Time 200 ms, DSLM Standy 5 sec (eco mode off), Decoupling time 2 sec
Neues C-6 Kabel gekauft, https://www.amazon.de/gp/product/B01N0Z5...UTF8&psc=1 - gleiches Problem...
Was könnte ich noch ausprobieren?