Posts: 395
Threads: 110
Joined: Jan 2018
I've made a few changes to my Pro Timer software. After the simplified input of the time for "Delay Time" I also implemented this input for the "Bulb Exposure Time". Furthermore, I have eliminated a few bugs.
Here is an overview of the extensions / changes compared to version 0.92
Changes and extensions
Changed menu navigation (see Flow Chart in the manual)
• Delay before timelapse sequence
• Auto display off
• Simplified entry of long times (delay time and bulb exposure)
Setup menu for setting and saving the following parameters:
• Min Dark Time
• Decoupling time
• Start Interval
• Display Brightness
•
Menu for setting the required parameters for motion control in connection with TLSMC:
• Delay Time
• Interval
• No of shots
• Shoot move delay
• Move Distance (Distance per Step is calculated automatically)
• M-S-M ramping (Distance Ramping)
Display auto off
• Display off after 20 seconds (if no key is pressed)
• Auto Display on after pressing any key
• Display on / off with the Select key
Operation manual:
It has been asked in the forum many times for a manual for the pro timer.
I took the time to write a manual for version 1.12.
The software for the TLSMC has been extended regarding the use of different stepper motors.
The version Por_Timer_free_ext V1.12, the TLSMC software V1.05 as well as manuals for both software versions can be found in the appendix.
For the TLSMC I still have kits available. If interested, just let me know!!
I would be happy, if MANY load the version on their Pro Timer and give a feedback !!!!
TLSMC1_05.zip (Size: 4.09 KB / Downloads: 50)
LRTimelapse_Pro_Timer_SMC_Free_EXT_112.zip (Size: 16.3 KB / Downloads: 45)
LRTimelpase Pro Timer extended_en.pdf (Size: 1.94 MB / Downloads: 122)
Timelapse Stepper Motor Controller for Pro Timer_en.pdf (Size: 841.56 KB / Downloads: 143)