Posts: 395
Threads: 110
Joined: Jan 2018
Hello Gunther, hello people,
as you may have already seen, I am working on a project "Timelapse Stepper Motor Controller for Pro Timer". Related to this were some extensions to the Pro Timer software. The menu structure of the Pro Timer software did not quite match my MMI ideas. That's why I've made a few changes: After starting the PT, the mode selection is displayed first. In the mode (M. Bulb, ..) the interval is set first. All other settings have remained the same. Then I have added an additional mode menu "Setup". In the mode setup you can set the "min dark time", the start interval, and the standard display brightness. All parameters are stored in the EEPROM and then read out again at the start of the PT. In the original version you had to create a new version to change the min dark time, the start interval was saved together with a changed display brightness. After the expiration or termination of a TL sequence, you automatically enter the mode from which the sequence was started. This makes more sense for me and also facilitates the operation. The Select button has been downgraded a bit and now just turns the display off and on. Also the changes from my version 0.92 are included in this version. Although this version is designed for my Stepper Motor Controller project, it works without TLSMC. The attached Flow Chart shows my MMI structure. I would be glad, if someone loads the software to his PT and am looking forward to the comments and questions. Greetings Hans
as you may have already seen, I am working on a project "Timelapse Stepper Motor Controller for Pro Timer". Related to this were some extensions to the Pro Timer software. The menu structure of the Pro Timer software did not quite match my MMI ideas. That's why I've made a few changes: After starting the PT, the mode selection is displayed first. In the mode (M. Bulb, ..) the interval is set first. All other settings have remained the same. Then I have added an additional mode menu "Setup". In the mode setup you can set the "min dark time", the start interval, and the standard display brightness. All parameters are stored in the EEPROM and then read out again at the start of the PT. In the original version you had to create a new version to change the min dark time, the start interval was saved together with a changed display brightness. After the expiration or termination of a TL sequence, you automatically enter the mode from which the sequence was started. This makes more sense for me and also facilitates the operation. The Select button has been downgraded a bit and now just turns the display off and on. Also the changes from my version 0.92 are included in this version. Although this version is designed for my Stepper Motor Controller project, it works without TLSMC. The attached Flow Chart shows my MMI structure. I would be glad, if someone loads the software to his PT and am looking forward to the comments and questions. Greetings Hans
Attached Files
Pro_Timer_SMC_FlowChart.pdf (Size: 110.86 KB / Downloads: 35)
LRTimelapse_Pro_Timer_SMC_Free_EXT.zip (Size: 13.35 KB / Downloads: 14)