• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Offline
#1 garfield72
hello, I do not know if I'm in the right place to post. I used Lrtimelapse in qDlsrdasboard for a sunset. Limit settings were 3.2s in exp, 4.5 in aperture, and 400 iso.
Start parameters: 1 / 320s, f14 and 200 iso. The speed went down to 1 / 3s, then did not change even though the exposure was -2.68 EV.
Is this normal?
Attached Files
Thumbnail(s)
       
Offline
#2 Gunther
Did the previews from the camera get transmitted? I cannot see any preview on your screenshot.
I'll move this thread to the qDDB board.
Subscribe to: LRTimelapse Newsletter, Youtube Channel, Instagram, Facebook.
Offline
#3 garfield72
Yes the preview was transmitted, but the screenshots were done after, the camera was disconnected.
do you have the link for qDDB board so that I follow it? Thanks
Offline
#4 Gunther
This is the qDDB Board :-) You can subscribe to the board on the top right when in the board overview.

I'd suggest you do some more tests with your configuration (just a test setup, not a really "holy grail") - see how long it takes to transfer the images, try different dark-times and see how short they can get etc.

And if you want help here, you definitely should provide more information about your setup: camera, connection type, smart device etc...
Subscribe to: LRTimelapse Newsletter, Youtube Channel, Instagram, Facebook.
Offline
#5 garfield72
Ok thanks. I am going to tests. My connection is in usb with an external intervalometer, a CANON 100D gun and a Huawei p7 lite. The interval between 2 photos is 5s.

...also check out: