Hello,
here is a how-to for using the TP-Link TL-WR902AC AC750 v.3 with qDslrDashboard:
https://naturfoto-suedpfalz.de/tp-link-t...rdashboard
The article also has firmware images, compiled and tested by me.
The first install on the firmware by the manufacturer is a bit tricky, but updates after that work via the OpenWrt web interface.
The how-to is available in English, French and German.

Thanks for sharing!

Thanks for sharing. Unfortunately, some of us are photographers, not IT specialists! I can see me descending into a black hole of frustration try to set up a router just to get qDSLR to work with my camera!

Fortunately, some of us have friends who are (also) IT specialists! :-)
But it is not really that hard, you don't need to be a "specialist" to do this. If you can install software on Windows, I think you can manage the necessary steps. Otherwise ask the same friend who takes care of the photography-related software on your computer. :-)
I have also seen that there are similar routers that come pre-installed with the necessary software:
https://dslrdashboard.info/phpBB3/viewto...f=4&t=3235

Thanks for sharing! I found this router on Amazon US for $20. I just ordered and will do some testing and report results back here.

I received this little router this past week. And, then followed the directions from the manufactures web site:
https://docs.gl-inet.com/en/3/app/qdslrdashboard/

Searching for the ddserver plugin didn't work right away but I was able to scroll through the plugin list and install it that way. Once the plugin was installed and the router connected to my Nikon D90 I was able to connect to the router with my iPad and use qDSLR (ControlMyCamera on IOS) and control my camera. Looking forward to doing more experiments. For $20 IMO this is a great value.