• 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[VIDEO TUTORIAL] Installation of DSLRDashboard on TP-Link MR3040

Offline
#21 Parovia
Thank you very much for this tutorial.
I just received my TP-Link MR3040 and am about to install the new firmware.
My question is very basic. Can I use a MAC running El Capitan or is it necessary to follow the setup using a PC to do the firmware installation?
Offline
#22 sameyeam
In the demo you set your dslr dashboard to 1EV.  Can you please explain why this is better than using 1/3 steps. Thanks!

Sam
Offline
#23 Gunther
I didn't watch the video, but I'd recommend to have the camera set to 1/3 stops.
Subscribe to: LRTimelapse Newsletter, Youtube Channel, Instagram, Facebook.
Offline
#24 farmer64
My question , can I use the Canon EOS 80D? I use a 5Ds and 600D without problems. Greetings Jens
Offline
#25 Gunther
Did you check the page / forum of the developer? http://dslrdashboard.info
Subscribe to: LRTimelapse Newsletter, Youtube Channel, Instagram, Facebook.
Offline
#26 Richard Jakobson
Thanks for making and sharing your video. Terrific.
Received my TL-MR3040 this afternoon. The firmware upgrade went like clockwork thanks to your instructions and I am now connected to my D810 via a Hudl2 before dinner!
Thanks again
Offline
#27 Joe_Belanger
I cannot get the IP address to come up. the instructions say: Access the MR3040 OpenWrt web interface by opening a web browser and entering http://192.168.0.1 (the default username/password is admin/admin)

Any advice?

Joe
Offline
#28 Gunther
Make sure that tplink ist properly connected to the computer via a LAN cable and that the computer has no other network connection. Make sure that theTPLink is set to "AP" mode via the switch too. Then try http://192.168.0.1 - you could as well try http://192.168.1.1 if it doesn't work.
For more help please tell us if you are using windows or mac.
Subscribe to: LRTimelapse Newsletter, Youtube Channel, Instagram, Facebook.
Offline
#29 bsartist
Looks like the video tutorial has been removed from YouTube. Says it can’t load. Anyone have a current link?
Offline
#30 Gunther
The video seems to be unavailable.

Here is a description on how to flash the TPLink router on my German Blog:
https://gwegner.de/know-how/camera-wlan-...dashboard/
Translated to english: https://translate.google.de/translate?sl...shboard%2F

Since the TPLink 3040 is hard to source these days, I've also written an article on how to flash an alternative router, see here:

https://gwegner.de/tipps/wlan-router-fue...dashboard/
Translated to English: https://translate.google.de/translate?sl...shboard%2F
Subscribe to: LRTimelapse Newsletter, Youtube Channel, Instagram, Facebook.

...also check out: