LRTimelapse Forum

I've uploaded the new Firmware 28 for the LRT PRO Timer 3 and LRT PRO Timer 2.5.

Firmware 28

• Fixed Cam Wakeup for some mirrorless cameras
  
• "Wake-Up" will now briefly appear on the main screen while waking up the cam (PT 3 only)
  
• Bulb mode let's now set lower exposure times than 5 seconds. Still, usually you should set the exposure in Camera whenever you can and use M-Mode / TL(M).
  
• Some UI Cleanups and fixes.
  

The firmware upgrade is free for all owners of a LRT PT 3 and 2.5. You can download the new version on the Firmware Update Page: https://lrtimelapse.com/lrtpt/firmware-updates/

If you have any feedback, please post it below.

Upgrade worked effortlessly, thank you.

Upgraded LRT3 and little test ... work fine.

One doubte, when like up values, the selector button need go to left, and right to down values. In others dispositives, rigth = up, and left = down. Don't remember if anterior version work different.

The shoot number value setting skip every 10 shots. It's possible include one new setting to define this skip? ex. 1, 10, 100 ...

Thanks for this relesase and Regards,

Mariano

You can change the rotation direction in the settings. All settings are explained on: https://lrtimelapse.com/lrtpt/manual/
Currently there are no plans to change the steps - if you rotate quicker you'll get bigger steps, if you rotate less, smaller.
Also if you have a certain amount of images you'd mostly use, just set it, then go to settings and "write settings" and the timer will remember that for the next start.

thanks