2022-05-14, 02:30
My Pro timer double click does not work. Is there anyway to fix this? As i have to shut down the timer if I want to change any thing with my settings.
2022-05-14, 02:30
2022-05-14, 11:02
Could you please clarify what you mean?
The only double click possible is on th small hidden reset button next to the USB port, this is only required to bring the timer into firmware update mode.
Otherwise, all settings can be changed in the settings menu.
The only double click possible is on th small hidden reset button next to the USB port, this is only required to bring the timer into firmware update mode.
Otherwise, all settings can be changed in the settings menu.
2022-05-14, 20:17
It is the large knob that you change the settings for timelapse. ie I want to end the timelapse I would have to double click the large button , but his will not work it did when I first got my Pro timer2.5. But know I have turn the switch at the side off and re start to end my timelapse. Hope this make sense.
2022-05-15, 00:09
There is no double click feature on that knob. You click shortly to go forward or long (1-2 secs) to go back. This is also what you need to do to abort a timelapse.
This is explained in the online manual on https://lrtimelapse.com/lrtpt
This is explained in the online manual on https://lrtimelapse.com/lrtpt