2016-06-07, 06:36
[size=small][font='Open Sans', Helvetica, Arial, sans-serif][/font][/size]
[size=x-small]No EXIF data.[/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif]So I have two separate projects... first is a Double Slider based off OpenBuilds C-Beam... It works like a Edelkrone slider plus in that both the mounting to the tripod and the camera move along the rail... so while its only 500mm long you get nearly 1m of travel. You loose a little travel from the plates being different sizes so you end up with about 900mm total.[/font][/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif]It can be used with or without a motor[/font][/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif]Its still a work in progress but took it out for test spin last week. Here's the hasty video I did the has two video samples and a time-lapse at the end[/font][/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif]I have a brief overview video and I'll be posting another more detailed video soon.[/font][/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif]I uploaded the build to OpenBuilds which is where I got the C-Beam from : http://www.openbuilds.com/builds/openbuilds-c-beam-double-slider.3462/[/font][/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif]I also have a video of the build here :[/font][/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif][/font][/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif][size=small][font=''Open Sans'', Helvetica, Arial, sans-serif]I[/font][/size][size=small][font=''Open Sans'', Helvetica, Arial, sans-serif]n the video you can also see my Pan & Tilt head which is comprised of two of my Rotators. [/font][/size][/font][/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif][/font][/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif]I have a demo video of just that[/font][/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif]along with pt1 of a build video (still need to do part 2)[/font][/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif]Everything is controlled with two miniEngine (http://minie.airiclenz.com) wired together. but any controller that can talk to steppers would work...[/font][/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif]both projects are up on thingiverse :[/font][/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif]Rotator : http://www.thingiverse.com/thing:1396552
L-Bracket (decided to use a metal one as there was some flexing) : http://www.thingiverse.com/thing:1415027
Leveling platform : http://www.thingiverse.com/thing:1510406
Double Slider : http://www.thingiverse.com/thing:1561622[/font][/size]
[size=x-small]No EXIF data.[/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif]So I have two separate projects... first is a Double Slider based off OpenBuilds C-Beam... It works like a Edelkrone slider plus in that both the mounting to the tripod and the camera move along the rail... so while its only 500mm long you get nearly 1m of travel. You loose a little travel from the plates being different sizes so you end up with about 900mm total.[/font][/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif]It can be used with or without a motor[/font][/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif]Its still a work in progress but took it out for test spin last week. Here's the hasty video I did the has two video samples and a time-lapse at the end[/font][/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif]I have a brief overview video and I'll be posting another more detailed video soon.[/font][/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif]I uploaded the build to OpenBuilds which is where I got the C-Beam from : http://www.openbuilds.com/builds/openbuilds-c-beam-double-slider.3462/[/font][/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif]I also have a video of the build here :[/font][/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif][/font][/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif][size=small][font=''Open Sans'', Helvetica, Arial, sans-serif]I[/font][/size][size=small][font=''Open Sans'', Helvetica, Arial, sans-serif]n the video you can also see my Pan & Tilt head which is comprised of two of my Rotators. [/font][/size][/font][/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif][/font][/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif]I have a demo video of just that[/font][/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif]along with pt1 of a build video (still need to do part 2)[/font][/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif]Everything is controlled with two miniEngine (http://minie.airiclenz.com) wired together. but any controller that can talk to steppers would work...[/font][/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif]both projects are up on thingiverse :[/font][/size]
[size=small][font='Open Sans', Helvetica, Arial, sans-serif]Rotator : http://www.thingiverse.com/thing:1396552
L-Bracket (decided to use a metal one as there was some flexing) : http://www.thingiverse.com/thing:1415027
Leveling platform : http://www.thingiverse.com/thing:1510406
Double Slider : http://www.thingiverse.com/thing:1561622[/font][/size]