+- LRTimelapse Forum (https://forum.lrtimelapse.com)
+-- Forum: Time Lapse Shooting (https://forum.lrtimelapse.com/Forum-time-lapse-shooting)
+--- Forum: LRTimelapse and qDslrDashboard Auto-Holy-Grail Ramping (https://forum.lrtimelapse.com/Forum-lrtimelapse-and-qdslrdashboard-auto-holy-grail-ramping)
+--- Thread: [VIDEO TUTORIAL] Installation of DSLRDashboard on TP-Link MR3040 (/Thread-video-tutorial-installation-of-dslrdashboard-on-tp-link-mr3040--3752)
RE: [VIDEO TUTORIAL] Installation of DSLRDashboard on TP-Link MR3040 - Parovia - 2016-01-24
Thank you very much for this tutorial.
I just received my TP-Link MR3040 and am about to install the new firmware.
My question is very basic. Can I use a MAC running El Capitan or is it necessary to follow the setup using a PC to do the firmware installation?
RE: [VIDEO TUTORIAL] Installation of DSLRDashboard on TP-Link MR3040 - sameyeam - 2016-01-26
In the demo you set your dslr dashboard to 1EV. Can you please explain why this is better than using 1/3 steps. Thanks!
Sam
RE: [VIDEO TUTORIAL] Installation of DSLRDashboard on TP-Link MR3040 - Gunther - 2016-01-27
I didn't watch the video, but I'd recommend to have the camera set to 1/3 stops.
RE: [VIDEO TUTORIAL] Installation of DSLRDashboard on TP-Link MR3040 - farmer64 - 2016-09-10
My question , can I use the Canon EOS 80D? I use a 5Ds and 600D without problems. Greetings Jens
RE: [VIDEO TUTORIAL] Installation of DSLRDashboard on TP-Link MR3040 - Gunther - 2016-09-11
Did you check the page / forum of the developer? http://dslrdashboard.info
RE: [VIDEO TUTORIAL] Installation of DSLRDashboard on TP-Link MR3040 - Richard Jakobson - 2016-12-14
Thanks for making and sharing your video. Terrific.
Received my TL-MR3040 this afternoon. The firmware upgrade went like clockwork thanks to your instructions and I am now connected to my D810 via a Hudl2 before dinner!
Thanks again
RE: [VIDEO TUTORIAL] Installation of DSLRDashboard on TP-Link MR3040 - Joe_Belanger - 2017-03-25
I cannot get the IP address to come up. the instructions say: Access the MR3040 OpenWrt web interface by opening a web browser and entering http://192.168.0.1 (the default username/password is admin/admin)
Any advice?
Joe
RE: [VIDEO TUTORIAL] Installation of DSLRDashboard on TP-Link MR3040 - Gunther - 2017-03-25
Make sure that tplink ist properly connected to the computer via a LAN cable and that the computer has no other network connection. Make sure that theTPLink is set to "AP" mode via the switch too. Then try http://192.168.0.1 - you could as well try http://192.168.1.1 if it doesn't work.
For more help please tell us if you are using windows or mac.
RE: [VIDEO TUTORIAL] Installation of DSLRDashboard on TP-Link MR3040 - bsartist - 2019-02-25
Looks like the video tutorial has been removed from YouTube. Says it can’t load. Anyone have a current link?
RE: [VIDEO TUTORIAL] Installation of DSLRDashboard on TP-Link MR3040 - Gunther - 2019-02-25
The video seems to be unavailable.
Here is a description on how to flash the TPLink router on my German Blog:
https://gwegner.de/know-how/camera-wlan-mit-dslrdashboard/
Translated to english: https://translate.google.de/translate?sl=de&tl=en&u=https%3A%2F%2Fgwegner.de%2Fknow-how%2Fcamera-wlan-mit-dslrdashboard%2F
Since the TPLink 3040 is hard to source these days, I've also written an article on how to flash an alternative router, see here:
https://gwegner.de/tipps/wlan-router-fuer-kamera-und-dslrdashboard/
Translated to English: https://translate.google.de/translate?sl=de&tl=en&u=https%3A%2F%2Fgwegner.de%2Fknow-how%2Fcamera-wlan-mit-dslrdashboard%2F