+- LRTimelapse Forum (https://forum.lrtimelapse.com)
+-- Forum: Time Lapse Shooting (https://forum.lrtimelapse.com/Forum-time-lapse-shooting)
+--- Forum: Time lapse shooting, Intervalometers, Motion Control Hardware (https://forum.lrtimelapse.com/Forum-time-lapse-shooting-intervalometers-motion-control-hardware)
+--- Thread: Sony a6300 intervalometer with loading function (/Thread-sony-a6300-intervalometer-with-loading-function)
Sony a6300 intervalometer with loading function - Joel_Klein - 2017-12-28
Hello,
I have following problem:
I bought me on amazon a intervalometer for my Sony a6300 camera and all works fine.
But I would like to use the intervalometer and an extrernal power supply. Dose anyone knows about someting like a Y cable or someting else.
If not have any body the circuit wiring for the multi port plug on the a6300/6500...?
If not I have to reverse engeneering and build this for my own.
regards
RE: Sony a6300 intervalometer with loading function - Gunther - 2017-12-28
Let us know, if you find a solution. I guess this would be important for many Sony users!
Posted mobile via Tapatalk...
RE: Sony a6300 intervalometer with loading function - Joel_Klein - 2017-12-28
I searched on the Internet and I found a Cable: https://www.mobilexcopter.com/shop.htm#!/Sony-multiport-compatible-USB-+-trigger-cable-black/p/58445676/category=3342130
I wrote with the Support and the said That the direct trigger connector is 3.5mm, but can be used with an adapter to get a standard 2.5mm format. I could not order it because I live in the EU and the cable are not available yet.
But on the same Page I found the Multiconector with soldering pads I orderd some and try to build my own adapter because the shop has no estimate when the cabele is available.
RE: Sony a6300 intervalometer with loading function - Joel_Klein - 2018-03-07
Hello,
after a long time I'm back...
I decided to create my own dongle for my Sony Camera.
I created a custom pcb and after few measurements with my multimeter I think it would work.
In few days I get the Multiport Plug and then I can test the complete function.
Here a picture of the pcb:
http://www.bilder-upload.eu/show.php?file=b28761-1520449754.jpg