+- LRTimelapse Forum (https://forum.lrtimelapse.com)
+-- Forum: Archive (https://forum.lrtimelapse.com/Forum-archive)
+--- Forum: LRT5 - General Questions (https://forum.lrtimelapse.com/Forum-lrt5-general-questions)
+--- Thread: Holy Grail orange curve error (/Thread-holy-grail-orange-curve-error)
Holy Grail orange curve error - vikas chander - 2018-02-05
Hi Gunther,
Congratulations on the introduction of LRT 5 !!!!
in LRT 5 my holy grail orange curve is not displaying properly.
it starts with touching the extreme lower left bottom and then rises up to touch the extreme top right
see screen grab - [Image: https://www.photobox.co.uk/my/photo?album_id=5247302011&photo_id=500558017922]
https://www.photobox.co.uk/my/photo?album_id=5247302011&photo_id=50055801792
What am i doing wrong ??
regards
vikas
RE: Holy Grail orange curve error - Gunther - 2018-02-05
I cannot open that link. Can't you use the rotate slider to bring it closer to the middle line? Please send a screenshot that I can open.
RE: Holy Grail orange curve error - vikas chander - 2018-02-05
Hi Gunther
here is the image - the orange holy grail sits right at the bottom and then rises right to the top ...
[Image: https://www.vikaschander.com/wp-content/uploads/2018/02/HG-curve.png]
regards
vikas
RE: Holy Grail orange curve error - Gunther - 2018-02-05
What about the rotate slider - can't you fix it with that slider?
Is that a sequence that you already had edited with a former version? Right click on the folder and select "clear all LRTimelapse editing" then try again.
RE: Holy Grail orange curve error - vikas chander - 2018-02-05
Hi
i can rotate the slider to the extreme left and get the curve shown below .... but it is not what i normally expect to do.
Yes , i have cleared the editing 2-3 times but always got the same result
[Image: https://www.vikaschander.com/wp-content/uploads/2018/02/HG-curve-2.png]
RE: Holy Grail orange curve error - Gunther - 2018-02-05
I'm not sure why this is happening. I can't see how close those adjustments have happened there. The Holy Grail Wizard needs at least 1-2 frames between every adjustment.
RE: Holy Grail orange curve error - vikas chander - 2018-02-05
Hi,
In LRT 4.7 the holy grail orange curve for the same sequence looks fine.
[Image: https://www.vikaschander.com/wp-content/uploads/2018/02/HG3-copy.jpg]
vikas
RE: Holy Grail orange curve error - Gunther - 2018-02-05
No, it doesn't. Look at the end.
Posted mobile via Tapatalk...
RE: Holy Grail orange curve error - vikas chander - 2018-02-05
Hi
the end is when it is completely dark and the QDSLR app has reached its set limits. That is normally what happens in all my sequences when it is totally dark and QDSLR is no longer " allowed" to ramp. In fact the start of the gentle curve downwards signals the end of ramping for qdslr. I normally rotate the holy grail curve but for the sake of clarity and direct comparison did not rotate the curve.
Alternatively , how do i get the orange holy grail curve to look the same way in LRT 5.0 as it does in LRT 4.7, for the same sequence...
vikas
RE: Holy Grail orange curve error - Gunther - 2018-02-05
The HG Wizard in LRT4 had a couple of problems and was not really accurate, that's why the new one works better. Of course I couldn't test each and every scenario possible, but in my scenarios it worked very well.
If you want, you can send me your sequence in a zip file via https://fromsmash.com and I'll have a look. But to me it seems that the rotate slider was able to bring your sequence to the horizontal middle so that you can work with it. The rest can be done via keyframe editing.