Nmx Motion setup - Printable Version +- LRTimelapse Forum (https://forum.lrtimelapse.com) +-- Forum: Time Lapse Shooting (https://forum.lrtimelapse.com/Forum-time-lapse-shooting) +--- Forum: Time lapse shooting, Intervalometers, Motion Control Hardware (https://forum.lrtimelapse.com/Forum-time-lapse-shooting-intervalometers-motion-control-hardware) +--- Thread: Nmx Motion setup (/Thread-nmx-motion-setup) |
Nmx Motion setup - TourWizard - 2018-02-27 When using Dynamic Perception Stage zero with Pan & tilt, do I setup the moves in the NMX app then put in Slave Mode? So when the [size=small]qDslrDashboard[/size][size=small],[/size] runs it will move the inputted moves? Make Sense? RE: Nmx Motion setup - KidsOfAllAges - 2018-02-27 yes, that's one way to do it. then you need to hook up the GPIO of the NMX to the PC Socket of your camera. RE: Nmx Motion setup - Gunther - 2018-02-27 Unless really needed, I recommend not using the Slave mode and triggering the camera just via the NMX. |