Falling Edge Signal and Signal Drop - Printable Version +- LRTimelapse Forum (https://forum.lrtimelapse.com) +-- Forum: LRTimelapse PRO Timer (https://forum.lrtimelapse.com/Forum-lrtimelapse-pro-timer) +--- Forum: LRT Pro Timer Free (English) (https://forum.lrtimelapse.com/Forum-lrt-pro-timer-free-english) +--- Thread: Falling Edge Signal and Signal Drop (/Thread-falling-edge-signal-and-signal-drop) |
Falling Edge Signal and Signal Drop - Lensupthere - 2018-06-07 We use a Phase One RS-1000 for aerial image mapping. Per the user guide, the falling edge signal needs to last as minimum 2 milliseconds, and the signal drop cannot be longer than one nanosecond. Does LRT Pro-Timer Free meet these specifications? Thanks. Falling Edge Signal and Signal Drop - Gunther - 2018-06-07 You can set the trigger time in the code. I don't know about fall of times etc. I guess you'll have to try. Yet every camera I know of worked fine with the timer. In rare cases the release time had to be fine tuned. RE: Falling Edge Signal and Signal Drop - Lensupthere - 2018-06-08 Thanks for the quick response. I'll plan on building this coming week and will let you know. Thanks. RE: Falling Edge Signal and Signal Drop - Lensupthere - 2018-06-12 Works with our Phase One iXU RS 1000 industrial aerial camera just fine. Falling Edge Signal and Signal Drop - Gunther - 2018-06-12 Great! :-) |