problem with individual transitions - Printable Version +- LRTimelapse Forum (https://forum.lrtimelapse.com) +-- Forum: Archive (https://forum.lrtimelapse.com/Forum-archive) +--- Forum: LRT5 - General Questions (https://forum.lrtimelapse.com/Forum-lrt5-general-questions) +--- Thread: problem with individual transitions (/Thread-problem-with-individual-transitions) |
problem with individual transitions - Kers - 2018-08-06 I am busy with a timelapse where the holy grail and the deflickering go partly wrong . the reason is: The subjects luminance is changing a lot. It is a natural change that has to be preserved. my camera has shot this part in manual mode without changing anything. The contant factor of choice is now the camera exposure. - So now i want to set the HGlum leveling and deflickering for this part to lineair. somehow i cannot do it. i selected the group of images that need to be changed. in the column heads only HG lum and deflickering are set to ON i choose individual transitions and press on lineair nothing happens... i can do it manually one by one - but that takes a long time... RE: problem with individual transitions - Gunther - 2018-08-07 HG Lum is an internal parameter, that LRT uses for Holy Grail and Deflicker also. You cannot apply a transition to those values. I don't know exactly your sequence and what is the deal with it, but you should be able to fix it the regular way, by using deflicker and a proper reference area. The reference area for deflicker is exactly what you use to separate natural changes in luminosity from flicker. Check out my deflicker tutorial. |