qDlsrdasboard - Printable Version +- LRTimelapse Forum (https://forum.lrtimelapse.com) +-- Forum: Time Lapse Shooting (https://forum.lrtimelapse.com/Forum-time-lapse-shooting) +--- Forum: LRTimelapse and qDslrDashboard Auto-Holy-Grail Ramping (https://forum.lrtimelapse.com/Forum-lrtimelapse-and-qdslrdashboard-auto-holy-grail-ramping) +--- Thread: qDlsrdasboard (/Thread-qdlsrdasboard) |
qDlsrdasboard - garfield72 - 2019-02-14 hello, I do not know if I'm in the right place to post. I used Lrtimelapse in qDlsrdasboard for a sunset. Limit settings were 3.2s in exp, 4.5 in aperture, and 400 iso. Start parameters: 1 / 320s, f14 and 200 iso. The speed went down to 1 / 3s, then did not change even though the exposure was -2.68 EV. Is this normal? RE: qDlsrdasboard - Gunther - 2019-02-14 Did the previews from the camera get transmitted? I cannot see any preview on your screenshot. I'll move this thread to the qDDB board. RE: qDlsrdasboard - garfield72 - 2019-02-14 Yes the preview was transmitted, but the screenshots were done after, the camera was disconnected. do you have the link for qDDB board so that I follow it? Thanks RE: qDlsrdasboard - Gunther - 2019-02-14 This is the qDDB Board :-) You can subscribe to the board on the top right when in the board overview. I'd suggest you do some more tests with your configuration (just a test setup, not a really "holy grail") - see how long it takes to transfer the images, try different dark-times and see how short they can get etc. And if you want help here, you definitely should provide more information about your setup: camera, connection type, smart device etc... RE: qDlsrdasboard - garfield72 - 2019-02-14 Ok thanks. I am going to tests. My connection is in usb with an external intervalometer, a CANON 100D gun and a Huawei p7 lite. The interval between 2 photos is 5s. |