extending decoupling time - Printable Version +- LRTimelapse Forum (https://forum.lrtimelapse.com) +-- Forum: LRTimelapse PRO Timer (https://forum.lrtimelapse.com/Forum-lrtimelapse-pro-timer) +--- Forum: LRT PRO Timer - General Discussion (English) (https://forum.lrtimelapse.com/Forum-lrt-pro-timer-general-discussion-english) +--- Thread: extending decoupling time (/Thread-extending-decoupling-time) |
extending decoupling time - djoubert - 2020-03-11 Hi, I thought to use the decoupling time to lauch the timelapse 10 or 15 minutes after starting ( another dslr to manage 5 minutes walking far and I want to start both at roughly the same time...) unfortunately the decoupling time is limited to 10s ? another to have a delay ? or maybe in a future release decoupling time able to have higher limit (900s ?) Thank you Dominique RE: extending decoupling time - Gunther - 2020-03-11 Hi Dominique, the decoupling time is meant to reduce camera shake when starting a timelapse. For what you are aiming to do, there is the Timed TL Mode or the Custom TL mode. Both let you easily set a starting time for your shooting! RE: extending decoupling time - djoubert - 2020-03-11 Hi Gunther, thank you for your answer, I am quite new with your timer using the standard mode so far... / I will try what you suggest / Thank you |