Standby/System sleep behaviour when performing batch operations in LRTimelapse - Printable Version +- LRTimelapse Forum (https://forum.lrtimelapse.com) +-- Forum: LRTimelapse (https://forum.lrtimelapse.com/Forum-lrtimelapse) +--- Forum: LRTimelapse 6 - General Questions (https://forum.lrtimelapse.com/Forum-lrtimelapse-6-general-questions) +--- Thread: Standby/System sleep behaviour when performing batch operations in LRTimelapse (/Thread-standby-system-sleep-behaviour-when-performing-batch-operations-in-lrtimelapse) |
Standby/System sleep behaviour when performing batch operations in LRTimelapse - lightatwork - 2023-08-16 Hi Gunther, This is regarding Mac operating systems: Do you have any advice on system setting with regard to energy saver, display sleep, etc.? I am running Mac OS X Ventura 13.5 on a Mac Studio M2 and I suspect that when I am running very long batch processes in LRTimelapse, at some point the system goes to sleep or some kind of state that stops/pauses the batch processes. Do you have any experience with this? If so, what could I do to make sure this doesn't happen? Thanks! BTW, running LRTimelapse on an M2 Ultra is heaven... ;-) RE: Standby/System sleep behaviour when performing batch operations in LRTimelapse - Gunther - 2023-08-16 If you run long batch processes you should make sure that the computer doesn't go to sleep / hibernate mode. You should be able to configure this in the energy / battery settings. |