When I try o update the firmware in Mr3040 I get "Waiting for 192.168.0.1" for ever! - Printable Version +- LRTimelapse Forum (https://forum.lrtimelapse.com) +-- Forum: Time Lapse Shooting (https://forum.lrtimelapse.com/Forum-time-lapse-shooting) +--- Forum: LRTimelapse and qDslrDashboard Auto-Holy-Grail Ramping (https://forum.lrtimelapse.com/Forum-lrtimelapse-and-qdslrdashboard-auto-holy-grail-ramping) +--- Thread: When I try o update the firmware in Mr3040 I get "Waiting for 192.168.0.1" for ever! (/Thread-when-i-try-o-update-the-firmware-in-mr3040-i-get-waiting-for-192-168-0-1-for-ever) |
When I try o update the firmware in Mr3040 I get "Waiting for 192.168.0.1" for ever! - elenamunoz - 2014-03-14 Hi, I am new here and I am not sure if this is the right thread to ask for support, but here I go.... I just got the MR3040 and cannot add the firmware... So far the steps i followed are: 1- Wi-Fi off. 2- Connected the MR3040 via ethernet and got into the 192.168.0.1 3- Tried to upgrade the firmware with ddserver_openwrt-tl-mr3040-v2-squashfs-factory_0.12.bin 4- I donĀ“t get any response.... only in the bottom or the page it says: Waiting for 192.188.0.1 to respond.... I tried several times and nothing moves... it has been on as long as 20 minutes and nothing... not even an error message. Just to try I reset the device to factory settings and that worked just fine. I am using Chrome and Windows 7. I am not very tech savy, hope you can help me... RE: When I try o update the firmware in Mr3040 I get "Waiting for 192.168.0.1&quo... - hubaiz - 2014-03-16 Here you have detailed instructions how to flash the OpenWrt firmware on a TP-Link MR3040: http://lrtimelapse.com/gear/dslrdashboard/ And here is also a nice video tutorial http://forum.lrtimelapse.com/Thread-video-tutorial-installation-of-dslrdashboard-on-tp-link-mr3040--3752 |