+- LRTimelapse Forum (https://forum.lrtimelapse.com)
+-- Forum: Time Lapse Shooting (https://forum.lrtimelapse.com/forum-30.html)
+--- Forum: LRTimelapse and qDslrDashboard Auto-Holy-Grail Ramping (https://forum.lrtimelapse.com/forum-25.html)
+--- Thread: TP LINK MODEM FIRMWARE (/thread-5048.html)
TP LINK MODEM FIRMWARE - deepeshdotcom - 2014-07-11
Hi,
I just received my TPLink MR3040 modem. Its the one with 3 point switch on the side and its says V 2.3
Which openwrt firmware shall I flash?
Thanks you in Advance
RE: TP LINK MODEM FIRMWARE - Gunther - 2014-07-11
Check http://dslrdashboard.info for the latest versions of the firmware.
It should be V2 factory for you.
RE: TP LINK MODEM FIRMWARE - deepeshdotcom - 2014-07-11
I did everything as mentioned in the guide /forum. Problem is my nexus 7v2 cant connect to tp link wifi. Its just says obtaining IP. Pls help.
RE: TP LINK MODEM FIRMWARE - Gunther - 2014-07-11
Sounds like the router might not be correctly flashed or configured.
RE: TP LINK MODEM FIRMWARE - deepeshdotcom - 2014-07-11
Now do I flash again? I can see the wifi openwrt but just can't connect? Which version to flash now?
RE: TP LINK MODEM FIRMWARE - Gunther - 2014-07-11
You should always flash using a wired (LAN) cable connection.
RE: TP LINK MODEM FIRMWARE - FableBlue2010 - 2014-07-11
You need to go into the tplink and change the LAST DIGIT(s) of the IP address to another number between 2-25. eg. 192.168.1.1 to 192.168.1.14 --- this is because 192.168.1.1 is a generic IP address used on a lot of wireless devices (in America, I do not know about the rest of the world) I think it is located at under the Network tab (I am not a computer wiz and I do not have my router (tplink) sitting in front of me at this time to give you the exact location but this should be close.)
Then let your tablet do a search for open network connections and it should find it. click on it and you are ready to rock.
RE: TP LINK MODEM FIRMWARE - deepeshdotcom - 2014-07-12
I reflashed it and problem solved. Thanks guys
RE: TP LINK MODEM FIRMWARE - TheModScene - 2014-09-21
Did you use the other video to restore it to factory settings first? Then re-install using the V0.2-13 factory files or just reflash it using the V0.2-13 Sys upgrade files? Still not getting mine to work
thanks