Holy Grail button greyed out all the time - Printable Version +- LRTimelapse Forum (https://forum.lrtimelapse.com) +-- Forum: LRTimelapse 6 (https://forum.lrtimelapse.com/forum-37.html) +--- Forum: Frequently Asked Questions (https://forum.lrtimelapse.com/forum-28.html) +--- Thread: Holy Grail button greyed out all the time (/thread-6639.html) |
RE: Holy Grail button greyed out all the time - Toneloc696 - 2018-10-19 so i used the keyframes wizard and it put those little triangles in and it still isnt activating the button for me? RE: Holy Grail button greyed out all the time - Gunther - 2018-10-22 The Holy Grail wizard will only activate, if you shot your sequence in M Mode. Otherwise it's not needed. Go for the Visual Deflicker instead. RE: Holy Grail button greyed out all the time - Dan Stevenson - 2018-11-19 Hi, I can't get the Holy Grail to activate. I shot a sequence using 'M' mode and adjusted the aperture only, from 14.0 to 4.0 manually, as the light levels dropped. When I use the Keyframes Wizard only 1 keyframe is generated. I have tried resetting the keyframes and re-loading the sequence but this does not resolve the problem. Do you have any suggestions? RE: Holy Grail button greyed out all the time - Gunther - 2018-11-20 If the keyframes wizard doesn't recognize your aperture changes, most likely they are not stored in the exif data. Then you'll not get the orange 2*/3* keyframes where the aperture changes and the HG-Wizard will not be enabled. Try setting the 2*/3* keyframes right before/after any aperture change (keys 2/3). Then the HG Wizard should get enabled. |