ISO does not change in Holy Grail - Printable Version +- LRTimelapse Forum (https://forum.lrtimelapse.com) +-- Forum: Time Lapse Shooting (https://forum.lrtimelapse.com/Forum-time-lapse-shooting) +--- Forum: LRTimelapse and qDslrDashboard Auto-Holy-Grail Ramping (https://forum.lrtimelapse.com/Forum-lrtimelapse-and-qdslrdashboard-auto-holy-grail-ramping) +--- Thread: ISO does not change in Holy Grail (/Thread-iso-does-not-change-in-holy-grail) |
ISO does not change in Holy Grail - DaveHi50 - 2015-07-30 My last sunset shoot in holy grail the ISO didn't increase. The shutter speed increase until 4 seconds as anticipated and at that point the Iso should have started to change. It didn't. The ISO stayed at 100. Im sure this has worked correctly in the past. Im not sure if it was just a one time glitch or if I had done something wrong. Has anyone else experienced this? Canon 1DX Emotimo Rokinon 14mm prime Nexus 7 RE: ISO does not change in Holy Grail - Gunther - 2015-07-30 How long was the interval? I suspect that after reaching the 4 secs exposure, the darktime between exposure and interval was not long enough to allow qDDB reading the preview and controlling the camera. Please make sure that you have at least 3-4 Seconds "dark time", this time depends from your setup, you should check it out before the next shooting. RE: ISO does not change in Holy Grail - DaveHi50 - 2015-07-31 (2015-07-30, 20:57)gwegner Wrote: How long was the interval? I suspect that after reaching the 4 secs exposure, the darktime between exposure and interval was not long enough to allow qDDB reading the preview and controlling the camera. Please make sure that you have at least 3-4 Seconds "dark time", this time depends from your setup, you should check it out before the next shooting.I think you are correct. I believe i had a 4 second interval and 3.9 dark time. This wouldn't allow for the camera to process the info. Thanks!! |