moon jerk / how to add interpolation ? - Printable Version +- LRTimelapse Forum (https://forum.lrtimelapse.com) +-- Forum: General (https://forum.lrtimelapse.com/forum-14.html) +--- Forum: Time lapse video post processing (https://forum.lrtimelapse.com/forum-23.html) +--- Thread: moon jerk / how to add interpolation ? (/thread-7285.html) |
moon jerk / how to add interpolation ? - djoubert - 2015-11-12 HI, Actually I shooted a moon rise with a very long focale lenth: 500 on an APS/C DSLR. I did not think about the interval, and as I shooted with DSLRdashboard I put 4s to ensure the process. The result is that my timelapse is jerked. I guess that with 2s it should have been better? So how to improve with the postprocessing? - how to add interpolation images? any idea about a solution. I tried LRT plus motion blur, but this is not the right solution in this case ( moon rise on a very thin moon ) Thank you Dominique RE: moon jerk / how to add interpolation ? - Gunther - 2015-11-12 You could try to bring the moon at the same position by animating the crop. I explained this here: http://lrtimelapse.com/news/lunar-eclipse-2015-timelapse/ RE: moon jerk / how to add interpolation ? - djoubert - 2015-11-12 Hi, Thank you for your answer. I had a look to the solution you proposed, actually, I am not sure to have been well understood? For this moon rise sequence, I have the moon over the mountain, at the beginning just on the edge, then going away at the top-right at the end. My issue is that from one image to the next one, the movement of the moon is too much due to the focal length/interval. Any other idea, or maybe the solution you propose is applicable ? Thank you Dominique RE: moon jerk / how to add interpolation ? - Gunther - 2015-11-12 Hard to say, without knowing that sequence. I would try my approach. RE: moon jerk / how to add interpolation ? - djoubert - 2015-11-12 Hi, Maybe, if you have time to have a look to the sequence I try to improve: www.astrophoto-passion.com/tmp/timelapses/moon-issue-sequence.mp4 My point is that I should add images ( 2 instead of 1) with interpolation ? Thank you again . Dominique PS : the eclipse timelapse you realised is great ! I was trying to do the same kind of timelapse, but the clouds eclipsed the moon ... |