+- LRTimelapse Forum (https://forum.lrtimelapse.com)
+-- Forum: Time Lapse Shooting (https://forum.lrtimelapse.com/Forum-time-lapse-shooting)
+--- Forum: Time lapse shooting, Intervalometers, Motion Control Hardware (https://forum.lrtimelapse.com/Forum-time-lapse-shooting-intervalometers-motion-control-hardware)
+--- Thread: How to get rid of stutter??anyone? (/Thread-how-to-get-rid-of-stutter-anyone)
Pages:
1
2
How to get rid of stutter??anyone? - Franck P - 2016-07-12
Hello Gunther, Hello everyone.
Does anybody experience that horrible stutter/jitter like on that sequence.
The movement doesn't seem to be too fast, there's 564 frame for 2 feet of dolly, shot at 1/50sec to 1/5 of a second.
Aperture at F/14.0 all the way, no ND filter on it.
If anybody has a solution for that, it would be greatly appreciated...and it could take me further down the road for more time-lapses.
Thanks for your help.
check the link below...password: LRT4
https://vimeo.com/174310597
RE: How to get rid of stutter??anyone? - rodrigo - 2016-07-12
Hi Franck, I can only see flickering in the sky region of the sequence, no stuttering on the slide action, I assume that you did do a "deflickering" after loading the "Visual Previews" and smoothed the green curve.
regards,
Rodrigo
RE: How to get rid of stutter??anyone? - Gunther - 2016-07-12
Don't see jitter too, only fliker. Make sure to set a reference area to the sky and use visual deflicker then to get rid of it.
RE: How to get rid of stutter??anyone? - Franck P - 2016-07-12
well maybe it's the vimeo compression but when I was looking at the sequence ...the spikes from the fence looked jittery between each frame...like it's not fluid at all....and I agree on the sky
I'll check that, thanks everyone
RE: How to get rid of stutter??anyone? - Franck P - 2016-07-13
The jittery on the fence seems to be less noticeable.....but the flickering in the sky is still present
Am I missing something?
RE: How to get rid of stutter??anyone? - Gunther - 2016-07-13
You could do one or two "refine" passes on the visual deflicker. Just click on "Visual deflicker again" and apply "refine". You can do this until the curve is smooth.
In any case: make sure, that you have installed the latest Adobe DNG Converter on your system, otherwise you might get problems! (link on http://lrtimelapse.com/install )
RE: How to get rid of stutter??anyone? - Franck P - 2016-07-15
Thanks Gunther, \
I did all the refines I can..... and latest DNG is installed.
I'll try to upload the "new" version
RE: How to get rid of stutter??anyone? - Gunther - 2016-07-15
Sometimes, if you edit too much in Lightroom, especial with "non-linear" tools, lightroom will introduce contrast flicker that cannot easily be removed, see this article: http://lrtimelapse.com/news/use-the-new-dehaze-with-care-on-time-lapses/
RE: How to get rid of stutter??anyone? - Franck P - 2016-07-15
I'm under Lightroom 3....
maybe a bit too old?
RE: How to get rid of stutter??anyone? - Gunther - 2016-07-15
I do not recommend using LR3 anymore. But if you do, you have to set the process mode to "LR3" in the LRTimelapse settings, but you'll definitely get better results with the newer process version "2012" introduced with LR4. I'd recommend upgrading to the latest lightroom (6 or CC).