D600+TL-MR340+iOS = No connection - Printable Version +- LRTimelapse Forum (https://forum.lrtimelapse.com) +-- Forum: Time Lapse Shooting (https://forum.lrtimelapse.com/Forum-time-lapse-shooting) +--- Forum: LRTimelapse and qDslrDashboard Auto-Holy-Grail Ramping (https://forum.lrtimelapse.com/Forum-lrtimelapse-and-qdslrdashboard-auto-holy-grail-ramping) +--- Thread: D600+TL-MR340+iOS = No connection (/Thread-d600-tl-mr340-ios-no-connection) |
D600+TL-MR340+iOS = No connection - buzze - 2016-07-25 Help please. I can't get this combination working. I can access the router from the iOS devices (tried it with an iPhone 6s and an iPad mini) but i don't get any connection to the camera. I'm using a USB-cable that was working fine with qDDB running on a Windows notebook. The router is the one from Photecs with the pre-installed alternative firmware. I press the Wifi connection button (long), the menu pops up (with the correct IP), i hit OK and nothing happens. qDDB Version is 3.5.1 Thanks four your help! RE: D600+TL-MR340+iOS = No connection - Gunther - 2016-07-26 For such technical questions the forum of the dslrdashboard developer might be better: http://dslrdashboard.info You should provide info about which camera you are using too. |