LRTimelapse Pro Timer Free Version 0.89 released - Printable Version +- LRTimelapse Forum (https://forum.lrtimelapse.com) +-- Forum: LRTimelapse PRO Timer (https://forum.lrtimelapse.com/forum-46.html) +--- Forum: LRT Pro Timer Free (English) (https://forum.lrtimelapse.com/forum-36.html) +--- Thread: LRTimelapse Pro Timer Free Version 0.89 released (/thread-9586.html) |
LRTimelapse Pro Timer Free Version 0.89 released - Gunther - 2017-08-30 Changes by Klaus Heiss, Austria (Thank you!)
RE: LRTimelapse Pro Timer Free Version 0.89 released - abejarutas - 2017-08-30 Is it necessary to remove the LCD shield to update Arduino ?. Thanks once again RE: LRTimelapse Pro Timer Free Version 0.89 released - niko_at - 2017-08-30 (2017-08-30, 14:53)abejarutas Wrote:(2017-08-30, 11:57)gwegner Wrote: You can download the update from the project page.Is it necessary to remove the LCD shield to update Arduino ?. No, it is not necessary: - Simply connect the usb cable - Download Sketch (as Zip and unzip it ) - Open Sketch "LRTimelapse_Pro_Timer_Free.ino" with Arduino IDE (i assume, you have installed Arduiono IDE) - Under Tools check if the right board is selected (normally Arduino UNO) - also check Port: Select serial port which was added, as you plugged in the Arduino UNO - last but not least: upload! that should work ;-) RE: LRTimelapse Pro Timer Free Version 0.89 released - abejarutas - 2017-08-30 Done! Thank you very much. RE: LRTimelapse Pro Timer Free Version 0.89 released - MLXXXp - 2017-08-31 (2017-08-30, 11:57)gwegner Wrote: Params can be saved in EEPROM: The project page should be updated to say that the LRTimelapse_Pro_Timer_Free folder contains 5 files instead of 3. EEPROMConfig.h and EEPROMConfig.cpp have been added. Currently the page reads: Quote:It is important that the LRTimelapse_Pro_Timer_Free folder is located in the sketch directory and contains those three files. If you want to be complete, the screenshots should also be updated to show the new files and show the sketch name as LRTimelapse_Pro_Timer_Free instead of gw_timer. The flow-diagram created by Bernard is now also out of date. (Actually, it's just completely missing the backlight an EEPROM save control.) RE: LRTimelapse Pro Timer Free Version 0.89 released - chris4775 - 2017-12-05 Thank you, it was a bad EEPROM library. Everything is in order. |