Posts: 4
Threads: 2
Joined: Jul 2012
Posts: 4
Threads: 2
Joined: Jul 2012
Tried editing a hyperlapse from my new DJI Mavic 2 Pro and noticed that after auto transition, white balance values are reset to 5001K, 10 no matter what they were before. All other attributes such as exposure ramp normally. LRT doesn't even see WB as values that change and it hides those columns. The only way to make it work is show the WB columns and manually dial in a value -100 thru 100 (I had to come up with a table for what temperature these values correspond to).
Fixes I've tried:
Upgrading from 4.8.3 to latest version 5 for Mac
Updating DNG converter
Initializing metadata before working with the sequence
Using LR to convert to DNG (even though they were already DNG)
Here is a zip file with 7 of the raw images for testing. These are straight from the drone and have not been changed except for the filenames. https://www.dropbox.com/s/qgdp3ugbmajaxu...s.zip?dl=0
Thanks in advance for your help, Gunther!
Brian
Fixes I've tried:
Upgrading from 4.8.3 to latest version 5 for Mac
Updating DNG converter
Initializing metadata before working with the sequence
Using LR to convert to DNG (even though they were already DNG)
Here is a zip file with 7 of the raw images for testing. These are straight from the drone and have not been changed except for the filenames. https://www.dropbox.com/s/qgdp3ugbmajaxu...s.zip?dl=0
Thanks in advance for your help, Gunther!
Brian