Replaced battere on Pro Timer 2.5 - Won't charge - Printable Version +- LRTimelapse Forum (https://forum.lrtimelapse.com) +-- Forum: LRTimelapse PRO Timer (https://forum.lrtimelapse.com/Forum-lrtimelapse-pro-timer) +--- Forum: LRT PRO Timer - General Discussion (English) (https://forum.lrtimelapse.com/Forum-lrt-pro-timer-general-discussion-english) +--- Thread: Replaced battere on Pro Timer 2.5 - Won't charge (/Thread-replaced-battere-on-pro-timer-2-5-won-t-charge) |
Replaced battere on Pro Timer 2.5 - Won't charge - Jiheffe - 2021-11-12 Hi, The original battery on my Pro Timer 2.5 wouldn't any more over about 20%. I tried the Settings -> Calibrate Battery procedure but to no avail. I went to replace the battery with an equivalent battery HJ 503035 3.7V 500 mAh, but it won't charge. Is there anything I can do to solve this? JF RE: Replaced battere on Pro Timer 2.5 - Won't charge - Gunther - 2021-11-13 For any warranty requests, please write to support(at)lrtimelapse.com - add your Invoice and postal address please. RE: Replaced battere on Pro Timer 2.5 - Won't charge - jiggyb21 - 2023-06-16 Hi @Jiheffe, Did you ever resolve this? This is EXACTLY my situation. Replaced battere on Pro Timer 2.5 - Won't charge - Gunther - 2023-06-16 The symptoms indicate that the charging regulator might be dead. Please write to the support address mentioned above, add your original invoice. RE: Replaced battere on Pro Timer 2.5 - Won't charge - gs87nt - 2024-02-28 Same situation for me. After a stop of more of some months, the original battery has died. After this, I changed the battery with a brand new one, and the new one won't charge more. Initially, I thought was a battery issue, so I changed it with a second new battery but I have had the same issue. I'm going to write to support! |