Test Mode - Printable Version +- LRTimelapse Forum (https://forum.lrtimelapse.com) +-- Forum: LRTimelapse PRO Timer (https://forum.lrtimelapse.com/Forum-lrtimelapse-pro-timer) +--- Forum: LRT Pro Timer Free (English) (https://forum.lrtimelapse.com/Forum-lrt-pro-timer-free-english) +--- Thread: Test Mode (/Thread-test-mode) |
Test Mode - BMSBMS - 2017-04-22 Hi, I've completed the upload and now testing the unit before moving onto the wiring etc. I note that not all menu items are available in test mode eg, the left most button has no effect on turning light on/off. Should I be able to change the interval and number of shots in test mode? Or do these items become 'live' once wiring is complete? I don't want to continue with the build if there is a problem that need rectification first. Thank you. RE: Test Mode - Gunther - 2017-04-22 It's possible in test mode. It seems that you might have used a different display unit, this means you might have to change the values for the buttons in the sketch. RE: Test Mode - BMSBMS - 2017-04-22 I have used the recommended SainSmart display unit and I also have a "clone" display which behaves exactly the same way. Not all menu items are visible and cannot be changed. RE: Test Mode - Gunther - 2017-04-22 Maybe this instruction in the German forum helps, use Google translate if necessary. https://forum.lrtimelapse.com/Thread-keine-bedienung-des-pro-timer-m%C3%B6glich?pid=31504#pid31504 Mobile via Tapatalk. RE: Test Mode - BMSBMS - 2017-04-22 Thanks, I've translated and read but will not have a chance to test until tomorrow. I'll let you know what happens. Thanks RE: Test Mode - BMSBMS - 2017-04-23 Is it possible the Arduino is defective? I checked the values of key presses and several were different and these I changed eg L = 188 U = 53 D = 122 Other key values were same as your program. The LCD_Keypad_Reader.cpp was edited with new values, compiled and uploaded. I still have same issue. I welcome any additional advice you can provide. Thanks RE: Test Mode - Gunther - 2017-04-23 Maybe you could try with another Arduino. I'm not an expert with this, sorry, but if you have a different display shield normally the tips from the other thread should help. Mobile via Tapatalk. RE: Test Mode - BMSBMS - 2017-04-28 Good news - replaced the Arduino and problem solved. Now to wire it up and put into action. |