Trouble Connecting to Syrp Geniei Mini - Printable Version +- LRTimelapse Forum (https://forum.lrtimelapse.com) +-- Forum: Time Lapse Shooting (https://forum.lrtimelapse.com/Forum-time-lapse-shooting) +--- Forum: Time lapse shooting, Intervalometers, Motion Control Hardware (https://forum.lrtimelapse.com/Forum-time-lapse-shooting-intervalometers-motion-control-hardware) +--- Thread: Trouble Connecting to Syrp Geniei Mini (/Thread-trouble-connecting-to-syrp-geniei-mini) |
Trouble Connecting to Syrp Geniei Mini - gmartin1215 - 2017-05-08 Hi, New to this group, but I hope I am in the correct forum for my issue. [size=small][font=verdana, helvetica, sans-serif]I received the Syrp 3-axis kit with the Genies Minis last week. I was able to connect to the Mini's through the app on my Samsung Galaxy Pro tablet and have a solid green LED, but maybe after 20-30 secs, they would disconnect to where I have a blinking green LED. The firmware on both Mini's are up to date because the app forced to to go through that process. After the firmware update, I powered off off both Mini's and then force closed the Syrp app on the tablet. Then I turned on both minis, next, launched the app, then connected both minis on the app to where I had a green check mark and the minis had solid green LEDs, but again it loses connection. The App at this point says searching and when it sees the minis, I reconnect again, but the loses connection again. [/font][/size]At this point, I have not connected a camera or the main Genie - just the minis [size=small][font=verdana, helvetica, sans-serif]Can anyone help with this problem?[/font][/size] RE: Trouble Connecting to Syrp Geniei Mini - rodrigo - 2017-05-09 (2017-05-08, 21:45)gmartin1215 Wrote: Hi,Hi, have you watch this tutorial ? https://www.youtube.com/watch?v=vUPvCe-CPOk I just own a mini and it is not much help I can give you apart from this tutorial. I know it may sound a stupid question but have you fully charged the minis before starting?, they take about overnight to be bully charged. The green light on the mini will blink until you establish a connection between the mini and the app in you phone or tablet. also what version of android are you using? it has to be 5.22 and over. regards, Rodrigo RE: Trouble Connecting to Syrp Geniei Mini - gmartin1215 - 2017-05-11 (2017-05-09, 16:23)rodrigo Wrote:Hi. Yeah. watched that video, and both mini's have full charge.(2017-05-08, 21:45)gmartin1215 Wrote: Hi,Hi, have you watch this tutorial ? https://www.youtube.com/watch?v=vUPvCe-CPOk I just own a mini and it is not much help I can give you apart from this tutorial. I am using a Samsung Galaxy Pro 8 which has Android 4.4.2 RE: Trouble Connecting to Syrp Geniei Mini - rodrigo - 2017-05-12 Hummmm, sorry I have never used a mobile phone. Regards, Rodrigo |