+- LRTimelapse Forum (https://forum.lrtimelapse.com)
+-- Forum: Time Lapse Shooting (https://forum.lrtimelapse.com/Forum-time-lapse-shooting)
+--- Forum: Time lapse shooting, Intervalometers, Motion Control Hardware (https://forum.lrtimelapse.com/Forum-time-lapse-shooting-intervalometers-motion-control-hardware)
+--- Thread: Syrp Genie Mini, no camera shutter (/Thread-syrp-genie-mini-no-camera-shutter)
Syrp Genie Mini, no camera shutter - evoll - 2017-12-01
Hi
The genie mini and my Nikon d750 dont seem to communicate.
Should the cable Connected to the Syrp be pushed all the way in?? My cable doesnt go all the way in and i dont want to put anymore pressure on without checking if anyone know if this is normal or not.
Thanks
RE: Syrp Genie Mini, no camera shutter - KidsOfAllAges - 2017-12-01
Not an expert on the Genie Mini, but if the cable does not go all the way in, it is very unlikely to work. It should go all the way in and there should not be any damage done, but as always, if you have to force it, there is something wrong. Check for mechanical obstacles.
RE: Syrp Genie Mini, no camera shutter - rodrigo - 2017-12-01
Sometimes the little tongue tends to bend upwards, check that it is straight and make sure it engages with the cord opening.
Regards,
Rodrigo
RE: Syrp Genie Mini, no camera shutter - evoll - 2017-12-01
Seems weird if its designed to not go all the way in.
RE: Syrp Genie Mini, no camera shutter - evoll - 2017-12-02
Just got an answer from syrp support. The plug i suppose to go all the way in and sometimes this requires a bit of force they said
It works now