Posts: 341
Threads: 6
Joined: Sep 2013
The current version is V0.30.33 (the one that is published on Google Play)
and the current version of ddserver OpenWrt firmware is 0.12
You can also download the latest version from my Drive share: https://drive.google.com/folderview?...1E&usp=sharing
The current DslrDashboard version is here: https://drive.google.com/folderview?...mtrS0FtLTJxR1E
The current ddserver OpenWrt firmware for MR3040 are here: https://drive.google.com/folderview?...mtrS0FtLTJxR1E
Upgrading the MR3040 firmware with latest:
Use the 'sysupgrade' image. Download the 'sysupgrade' .bin file that is matching your MR3040 version (V1, V2).
Connect the MR3040 with network cable to your PC or laptop (can be done with wireless to, but in my experience it's safer with network cable) .
Access the OpenWrt web interface ( http://192.168.1.1 by default)
Go to 'System->Backup/Flash image'
Press the 'Perform reset' button (this will reset OpenWrt to it's initial state and reboot the MR3040)
Once it reboots go to again in 'System->Backup/Flash image'
Under 'Flash new image' uncheck the 'Keep settings' checkbox
Select the 'sysupgrade' image that you downloaded.
Press the 'Flash image' button. (this will upload the firmware to MR3040)
Press again the button to perform the flash.
Wait 2-3 minutes, the MR3040 will reboot.
Be sure that the MR3040 battery is full.
After that you can access it again with http://192.168.1.1
The wireless is enabled by default, the SSID is 'DDServerAP'