This post was last modified: 2020-07-09, 00:51 by malcolmp.

Hi Gunther,
I have a QDSLR Dashboard question if you don't mind.
In your video tutorial on shooting Holy Grail, you say Auto NTC looks for the location and time settings from a GPS.
But if you don't have a GPS, can you enter this data manually somewhere if you have it?
Is the feature for GPS enabled cameras with wifi? Or for PC/MAC's with a GPS puck?
Couldn't it use the GPS on my Iphone for example?
Or it is reading the value from the image capture?
thanks,
Malcolm Park

Hi Malcom, normally you would be using qDDB on a Smart Device, like a phone or tablet, those usually have GPS which will then be used. I don't know, if it works on a PC/Mac with an external GPS adapter, I doubt it - but that's something you'd need to ask the developer via dslrdashboard.info.
You can enter the data manually if you click on the GPS button and then "Add position".
But as I said, if you are using this on a phone or table with built in gps, everything should work fine out of the box.