Posts: 341
Threads: 6
Joined: Sep 2013
The update can be done with battery (only it should be charged)
There is no need to setup the original TP-Link firmware.
You probably downloaded the file earlier as the 0.12 version was uploaded February 18 and the name is ddserver_openwrt-tl-mr3040-v2-squashfs-factory_0.12.bin
Anyway the downloaded firmware should also worked.
You didn't post a capture that I asked in my previous post ('details' button)
You can try to access the MR3040 in failsafe mode, follow the instructions here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3040
(scroll down a bit or search for failsafe)
and if you mange to get into failsafe then you could follow this: http://wiki.openwrt.org/doc/howto/generi...lsafe.mode
In the telnet terminal enter
firstboot
There is no need to setup the original TP-Link firmware.
You probably downloaded the file earlier as the 0.12 version was uploaded February 18 and the name is ddserver_openwrt-tl-mr3040-v2-squashfs-factory_0.12.bin
Anyway the downloaded firmware should also worked.
You didn't post a capture that I asked in my previous post ('details' button)
You can try to access the MR3040 in failsafe mode, follow the instructions here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3040
(scroll down a bit or search for failsafe)
and if you mange to get into failsafe then you could follow this: http://wiki.openwrt.org/doc/howto/generi...lsafe.mode
In the telnet terminal enter
firstboot