Posts: 17
Threads: 5
Joined: Jan 2024
Intervals are longer than what's set in LRTimer
My timelapse exposures are set to 3.2 seconds long. LrTimer is set to an interval of 3.7 secs. However when these are imported into LRTimelapse 6, the intervals are showing 7.4 seconds long. Not sure what I'm doing wrong. Would love to have some insight into this problem. Thanks. Rick
Posts: 183
Threads: 14
Joined: Jun 2015
Posts: 13,942
Threads: 189
Joined: Feb 2011
Exactly, obviously the camera is skipping frames. Check out the section in the manual about fine tuning the LRT PRO Timer to your camera on https://lrtimelapse.com/lrtpt/manual/ to learn about the minimum Dark Time - how to figure it out, how to optimize it.
Posts: 13,942
Threads: 189
Joined: Feb 2011
I have good experience with Nikon Z cameras and also Nikon DSLR Cameras but usually most "system cameras" from a certain level (as opposed to cheaper compact cameras) should perform well. Make sure to have a fast memory card.
Posts: 183
Threads: 14
Joined: Jun 2015
Posts: 13,942
Threads: 189
Joined: Feb 2011
No, the Ebook is available in English, Spanish and Chinese too! https://lrtimelapse.com/ebook/
Minimal Dark times usually are 0.3/0.4 secs.
Minimal Dark times usually are 0.3/0.4 secs.