• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Konova KMS S2 slider

Offline
#11 timelapsefrank
Thanks Ralph, Iam in contact with Blackforest. I also need more wires for LRT PRO timer to the controller and charger not sure what kind. I asked for them to list the part numbers. Will let ypu know as the slider does not come with any power charger.
Offline
#12 timelapsefrank
HERE IS THE EXTRA STUFF REQUIRED FOR THE COMPLETED PACKAGE JUST IN CASE ANYONE ELSE IS ORDERING IT.

A power supply for the Controller needs to be purchased separately. We recommend the following power banks (available e.g. on Amazon):

XTPower MP-10000
XTPower MP-16000
XTPower MP-20000
You don’t have to trigger Pine with your LRT Timer.
You can use the same cable for camera trigger.
Online
#13 Ralph
BFM's statement is correct. You don't have to trigger the camera with Pro Timer. This is done via the Pine R, the BFM controller. All you need is the cable you use for your camera. But if you want to trigger the system via ProTimer, i. e. run the controller in slave mode, you need the cable here: https://www.amazon.com/PHOLSY-Off-Camera...uage=en_US
As Powerbank I recommend this one to you: https://www.amazon.de/gp/product/B0096M8...UTF8&psc=1
It also has enough power to operate even further axes, the camera or a lens heater for hours.
Offline
#14 Sheeba
Hi Frank, I have just read your thread. When I started using Timelapse, I was also looking for an affordable system that met all my needs. But I did not find it in my budget. Ultimately, I decided to build a system myself. Based on Gunther's LRT Pro Timer Free, I made extensions and finally built a motion timelapse controller. This eventually became: https://forum.lrtimelapse.com/Thread-mot...m-for-sale
If you are interested or have questions, feel free to contact me.
Greetings Hans

...also check out: