Posts: 13,923
Threads: 188
Joined: Feb 2011
Changes by Klaus Heiss, Austria (Thank you!)
- LCD backlight dimming for power saving and optical reason
long pressing the select key (left most button), steps the dimming level. Just release the key at suitable level.
- while capturing a timelapse: up down keys are increasing or decreasing brightness for your convenience
- Power consumption at available brightness leveles to get an idea of possible power savings:
0 (OFF)50 mA
1 55 mA (you may now let backlight on always at this level)
2 70 mA
3 88 mA
4 104 mA
5 115 mA
6 124 mA
- Params can be saved in EEPROM:
quickly pressing the select key 2 times (double click) will save the following parameters to the EEPROM:
- current display background brightness level
- current interval
After power on or reset these values are restored from EEPROM
- Turned OFF Onboard LED 13. it only consumes battery power.